EN/ES
Back to Neonatal care

Comen BL70

Phototherapy lamp

Manufacturer represented
Neonatal careCategory
Comen BL70
Request a quotation
  • Manufacturer represented by Quirurgil
  • Our own technical service, present in five cities
  • Original spare parts and engineers trained by the manufacturer

A phototherapy unit for treating neonatal jaundice. Its irradiance probe measures how much light the infant is actually receiving, which is the difference between a measured treatment and a guessed one. The cold light LED source produces less heat, which allows long treatments without stressing the newborn.

What it brings

  • Irradiance probe that accurately measures the light reaching the infant
  • Maximum irradiance of 63 microwatts per square centimetre per nanometre
  • Five irradiance levels, according to the patient
  • Cold light LED source, with less heat and longer treatment
  • Service life of up to 50,000 hours

Where it is used

  • Neonatal intensive care
  • Neonatal care
  • Inpatient ward
  • Delivery room

Specifications

Maximum irradiance63 microwatts per cm2 per nm
Levels5
Service lifeUp to 50,000 hours
SourceCold light LED

Technical information published by the manufacturer.

Request a quotation
Back to Neonatal care
Keep exploring

Other equipment in Neonatal care

OlidefOlidef RWT Plus
Transport incubator

Olidef RWT Plus

  • Two operating modes: manual by air temperature and newborn with skin servo control
  • 7 inch colour touchscreen with temperature, humidity, date and time
  • Alarm self test, with alerts for power failure, overheating, hypothermia and hyperthermia
  • Double wall acrylic dome with three access doors and tube ports
  • Oxygen limiting valve with micro-filter and built-in humidification system
  • Low internal noise level, for the patient's comfort
Learn more
OlidefOlidef Matriz SC
Radiant warmer

Olidef Matriz SC

  • Servo control with a radiant heat system
  • Overhead heater that spreads warmth evenly across the bed
  • Pass-through drawer for the X-ray cassette, without moving the baby
  • Scale built into the bed and the control panel
  • Bed with fully folding, removable sides
  • Electric adjustment of bed tilt and height
Learn more
ComenComen B3
Neonatal incubator

Comen B3

  • Seven sensors and a cascade PID algorithm against overheating
  • Monitoring accuracy of 0.1 degrees and control accuracy of 0.5 degrees
  • Preheat in 15 minutes or less, with horizontal uniformity of 0.5 degrees
  • Apnoea rescue: abdominal sensor and a vibrator on the foot that stimulates the infant
  • Transparent removable water tank, against dry burning and infection
  • Electric bed with motorised tilt and a damped access door
Learn more
ComenComen B8
Neonatal incubator

Comen B8

  • Chamber warm-up in 35 minutes or less, with 0.5 degree fluctuation
  • Three independent overheating protections: system, hardware and mechanical
  • Effective humidity above 95 percent, for low weight premature infants
  • Titanium alloy evaporator and PEEK insulation, corrosion resistant
  • Neonatal monitoring with ExNeo ECG, Adap-DSP NIBP, Masimo SpO2 and apnoea rescue
  • Electric height adjustment by pedal and touchscreen, with adjustable tilt
Learn more

See the whole category

Need help choosing the right device?

Contact us
WhatsAppContact us