EN/ES
Back to Infusion

Comen MX8900

Infusion workstation

Manufacturer represented
InfusionCategory
Comen MX8900
  • Manufacturer represented by Quirurgil
  • Our own technical service, present in five cities
  • Original spare parts and engineers trained by the manufacturer

Modular station that brings M800 syringe pumps and ME900 infusion pumps together in one rack, expanding from two to twenty four pumps. The main controller runs the whole set from a single screen and a single power connection, and pumps mount without tools with automatic locking. The library holds up to five thousand drugs and the dose error reduction system warns when the order or the calculation does not add up.

What it brings

  • Modular plug and play design, expanding from two to twenty four pumps
  • Main controller for centralised management, and a cascade controller charging over a single cable
  • Intelli.Fast: first drop delivered nine seconds after power up
  • Intelli.Plan: saved treatment plans with the infusion parameters already set
  • Library of up to five thousand drugs and a dose error reduction system
  • Dynamic pressure system with twelve levels and early occlusion warning
  • Anti bolus: it releases the high pressure when occlusion happens
  • Six level bubble detection, with cumulative counting in fifteen minute windows
  • Dual pressure sensor, upstream and downstream, and automatic flow compensation
  • Automatic recognition of 2 to 60 ml syringes, from several brands
  • Continuous titration: the rate changes without stopping the infusion
  • Wired or WiFi connection, with HL7 to HIS, CIS and EMR
  • Carry handle and drop sensor for the empty container

Where it is used

  • Intensive care
  • Neonatal intensive care
  • Operating room
  • Inpatient ward
  • Patient transfer

Specifications

Make upM800 syringe pump and ME900 infusion pump on an MX8900 rack
ExpansionFrom 2 to 24 pumps per station
Accuracy1.8 percent on the M800 syringe pump, 4.5 percent on the ME900 infusion pump
Syringes supported2, 3, 5, 10, 20, 30 and 50 or 60 ml, automatically recognised
Drug libraryUp to 5000 entries
Display3.5 inch touch screen, with automatic brightness attenuation
Occlusion managementTwelve preset pressure levels, with colour, graphic and numeric indicators
Air detectionSix levels, with an alarm for bubbles accumulated over fifteen minutes
SequencesS1 to S12 defined by the user, with synchronous activation
ConnectivityCable or WiFi, HL7 protocol to HIS, CIS and EMR. Ports for barcode reader, nurse call and drop sensor

Technical information published by the manufacturer.

Keep exploring

Other equipment in Infusion

ComenComen M300
Syringe pump

Comen M300

  • Folding 4.3 inch touch screen, tilted 20 degrees
  • Library of 2100 drugs, extendable with your own entries
  • Ten working modes: rate, time, weight, interval, trapezoid, sequence, micro, TIVA, loading dose and night
  • Continuous titration: parameters change without stopping the infusion
  • A matrix of several processing units that watch one another
  • High performance stepper motor, with no pulse wave at low rates
  • Anti bolus: it releases the pressure automatically when obstruction occurs, with an audible and visual alarm
  • Dynamic pressure monitoring, with numeric and graphic readout
ComenComen M500
Dual channel syringe pump

Comen M500

  • Folding 6.2 inch touch screen, tilting from 0 to 45 degrees
  • Two parallel channels, for several drugs at the same time
  • Cascade relay mode: up to 120 ml of continuous infusion of the same drug
  • Library of 2100 drugs, extendable with your own entries
  • Ten working modes: rate, time, weight, interval, trapezoid, sequence, micro, TIVA, loading dose and night
  • Continuous titration: parameters change without stopping the infusion
  • A matrix of several processing units that watch one another
  • Anti bolus and dynamic pressure monitoring, with numeric and graphic readout

See the whole category

Need help choosing the right device?

WhatsAppContact us