EN/ES
Back to Operating tables

Heyer OP350

Electro-hydraulic operating table

Manufacturer represented
Operating tablesCategory
Heyer OP350
  • Manufacturer represented by Quirurgil
  • Our own technical service, present in five cities
  • Original spare parts and engineers trained by the manufacturer

The lowest table in the line: 495 millimetres without the mattress, which is what seated surgery calls for, and 505 millimetres of lift travel. It takes 350 kilograms on a four point support structure, and three dimensional modelling software watches the angles in real time to warn before two movements collide.

What it brings

  • Ultra low 495 mm position, with 505 mm of lift travel
  • 350 kg safe working load, on a four point support structure
  • Anti collision alarm from three dimensional modelling software
  • 304 stainless steel on frame, cover, rails and column
  • Four independent castors, with individual brakes and automatic locking while the position is adjusted
  • One button levelling, from the hand control or the column panel
  • Head and leg plate exchange plus 355 mm of longitudinal slide, leaving more than 1400 mm clear for the C-arm
  • Built in kidney bridge with 130 mm lift, chain driven, without obstructing the image
  • 75 mm removable viscoelastic foam mattress, with an antistatic layer
  • Optional LCD remote control, with stored positions

Where it is used

  • Neurosurgery
  • Minimally invasive surgery
  • Ophthalmology and ENT
  • Orthopaedic surgery

Specifications

Dimensions2040 mm long and 520 mm wide without the rail. Height from 680 to 950 mm without the mattress, and from 495 mm in the ultra low position
Safe working load350 kg
Trendelenburg and reverse30 and 30 degrees
Lateral tilt25 degrees to each side
Back plate85 degrees up and 45 down
Head plate60 degrees up and 90 down, detachable
Leg plates20 degrees up and 90 down, splitting to 180 degrees
Flex and reflex225 and 95 degrees
Kidney bridge and shift130 mm lift and 355 mm longitudinal shift
DriveFour electro-hydraulic systems
Power100 to 240 V AC and a rechargeable 24 V 13 Ah battery, with 8 hours of charging
Control17 button hand control and a 14 button column panel

Technical information published by the manufacturer.

Keep exploring

Other equipment in Operating tables

BarrfabBarrfab Smart Line BF683
Configurable operating tables

Barrfab Smart Line BF683

  • Fully configurable models, with optional accessories by specialty
  • RX version: full radiolucency with a carbon fibre top and free access for the C-arm
  • TDV version: transverse movement of the top in addition to longitudinal
  • PA version: retractable tray for obstetrics and gynaecology
  • STP version: motorised movements for minor procedures and examinations
  • TDO and TDP versions: traction and carbon fibre top for orthopaedics
BarrfabBarrfab motorized BF683
Motorized operating tables

Barrfab motorized BF683

  • Electro-hydraulic drive with stable movement throughout the service life
  • Redundancy system: on power failure the movements continue manually
  • Capacity of up to 454 kg with the top centred
  • Operated by pedal, corded remote or column control
  • Longitudinal travel giving full C-arm access without repositioning the patient
  • AISI 304 stainless steel frame and a radiolucent top
BarrfabBarrfab gel polymer accessories
Operating table accessories

Barrfab gel polymer accessories

  • Gel polymer supports and pads to position the patient on the table
  • Circular and semicircular face supports for head, face, neck and ears
  • Pads for chest, spine, sacrum, thighs, foot and heel
  • Shoulder and body positioners in high and medium versions
BarrfabBarrfab BF683 STP
Gynecology operating table

Barrfab BF683 STP

  • Sized for minor procedures and examinations
  • Predominantly motorised movements
  • Optional accessories according to the specialty
  • Smart Line structure, in stainless steel
  • Flexible positioning for the consulting room

See the whole category

Need help choosing the right device?

WhatsAppContact us